EPMAN 90 Degree Elbow Silicone Hose Pipe Turbo Intake 38mm 41mm 45mm 48mm 51mm 54mm 57mm 60mm 63mm 70mm 76mm 80mm 83mm 89mm 102mm EP-SS90RS

You are buying on 100% Brand New of:

EPMAN 90 Degree Elbow Silicone Hose Pipe Turbo Intake Black & Purple EP-SS90RS
Specification:

• Thickness of wall: 4.5±0.5 mm, 4 ply reinforced
• Bursting Pressure: 2Mpa
• Working Pressure: 0.3Mpa (43.5 PSI) to 0.9Mpa (130.5 PSI)
• Working Temperature: -76°F (-60°C ) to +500°F (+260°C)

Application for Universal: Basic replacement, Custom Turbo, Supercharger charge piping set up, custom compressor,  inlet for turbocharged and supercharged cars, vehicles, boats etc.

Attention: Please note : This item is not suitable for fuel or oil transfer.

Part NO.	Inside Diameter	Schematic Diagram
EP-SS90RS38	38mm (1.5″)
EP-SS90RS41	41mm (1.6″)
EP-SS90RS45	45mm (1.77″)
EP-SS90RS48	48mm (1.9″)
EP-SS90RS51	51mm (2″)
EP-SS90RS54	54mm (2.13″)
EP-SS90RS57	57mm (2.25″)
EP-SS90RS60	60mm (2.36″)
EP-SS90RS63	63mm (2.5″)
EP-SS90RS70	70mm (2.75″)
EP-SS90RS76	76mm (3″)
EP-SS90RS80	80mm (3.15″)
EP-SS90RS83	83mm (3.25″)
EP-SS90RS89	89mm (3.5″)
EP-SS90RS102	102mm (4″)

​

​Remark :

2,Customized brand need to pay additional cost.

All items are Brand New unless stated otherwise on the listing. We sell DIY (Do It Yourself) Items with a few exceptions. We take no responsibility in teaching you how to install. Professional installation is strongly recommended.